The Suunto CB One has a submersible pressure gauge mounted within a modular design housing that allows the additional and modification of the layout by adding extra gauge or dive computer modules as needed.
Modular Design can easily add or remove sections in the future to reflect your diving; you can add a depth gauge or integrate a compass on the end or on the back as all three sections have the same fittings, all held together with simple cross-head screws.
Linear Scale SM-36 Gauge with a red indication area between 50-0 bar. A reducing green hatch pattern is shown from the max 360 down to 100 bar. The gauge has a phosphorescent dial which can be activated by shining torch light on to the gauge, causing the gauge to glow and be read in low light conditions.
Incorporated Attachment Loops at the end and either side of the hose entry point and at the point. A Miflex braided hose is included which has a higher burst pressure and is much lighter than traditional rubber hoses.
Features
- Configure your CB-One console to a CB-Two by adding an SK-7 compass on top; Gauges, compasses and dive computers fit together like building blocks to give you individual diving freedom.
- Robust
- Easy to read
- Compact
Specifications
- Hose Length: 29" (approx)